eCAP-9045
|
|
Multifunction Capacitor Controller |
 |
|
|
Available in a wide variety |
|
of standard and legacy |
|
protocols |
|
|
| Based upon QEI’s legendary 6ACP5 platform, the eCAP-9045 provides three-phase, single-phase, 3-step, or 2-step capacitor bank control. It provides SCADA functionality via DNP or any other available byte-oriented server protocol available to the 6ACP5. |
|
| The eCAP-9045 accepts voltage and current inputs from either line post sensors or PT’s and CT’s. Capacitor switching is based on either Voltage or kVAr, with a local Voltage Override included, which has precedence over kVAr control. Neutral current detection is available. |
|
|
 |
| An included +12VDC 2.0A power supply provides power for the 6ACP5 board and customer supplied radio. The 6ACP5 provides six relay outputs (rated 10A/250VAC) arranged as 3 trip/close pairs for independent or ganged control of three cap bank switches. |
|
| Front panel switches are included for Phases A,B,C Open/Close, Auto, Manual, Remote, and Lock-out indication. |
|
|
| Environment: -40 to +85 degrees C |
| 5 to 95 % humidity (non condensing) |
|
|
|
|
| Enclosure: NEMA 4, 20” H X 16” W X 8.4” D |
9045 Brochure |