ConfigWiz proporciona una interfaz de usuario Windows® de arrastrar y soltar que guía al técnico a través de los pasos necesarios para definir una RTU:

• configuración de todos los puertos de comunicación
• selección de clientes de comunicación IED
• selección de servidores de comunicación Master Station
• mapeo de los puntos de datos entre la base de datos del cliente IED de la RTU y la base de datos del servidor de la Master Station

Una vez finalizado el proceso de configuración, el archivo de configuración de RTU resultante se archiva en PC para su almacenamiento a largo plazo y, a continuación, se compila y descarga en el STN-9180 para su ejecución.

The STN-9150 and STN 9050 can monitor not only hardwired status, analog and control points but can concentrate data from the intelligent electronic devices you have present on your network using all common IED protocols such as DNP3, Modbus, SEL Fast Meter/ASCII and others.

The STN-9150 is housed in a large freestanding or wall mounted enclosure with front access and uses a modular set of I/O panels for hardwired status, analog, accumulator and control inputs. These hardwired I/O panels are connected by chained ribbon-cable connections. The STN-9050 is housed in a smaller, wall/pole mounted cabinet and uses a single, fixed point count multifunction I/O panel for it’s hardwired points.

The base RTU microprocessor module supports both RS-232 and RS-485 connections for both master station and IED communication and serial port. An add-on daughterboard will supply TCP/IP connectivity through two ethernet ports.

The data points for I/O boards and IEDs are mapped for communications using our Windows® based ConfigWiz® software. Any value retrieved from an IED or I/O Panel may be mapped to one or more communications ports regardless of protocol, communications medium, baud rate or polling method. The STN-9150/9050 RTUs are very useful for matching legacy communication channels and protocols to your current enterprise network.